Note: For initial setup it is recommended that you configure the W150NR from a wired computer.

1. Open your web browser, type http://192.168.10.1 in the Address bar, and then press Enter.

2. Enter the User Name and Password, and then click Login.
   • User Name: admin
   • By default, there is no password. Note: The user name is case sensitive.

3. Click Wizard.

4. Click Next.

5. WAN configuration settings are based on information provided by your ISP. Follow the wizard instructions to complete the configuration.

Each Internet Connection type may have different options.

• DHCP: Automatically obtains an IP Address from your ISP.
• PPPoE: Requires Username and Password login information from your ISP.
• PPTP: Requires account information with Username and Password.

6. Select the desired level of security. Enter the desired SSID (Wireless Network Name) and encryption key for your wireless network then click Next.
   • Note: Your wireless computer needs the SSID and encryption key in order to access the wireless network.
   • To protect your network from any unauthorized access it is recommended to enable wireless encryption.
   • The example below is for WPA2 (AES) security. Please ensure you select a level of encryption supported by your wireless adapters and appliances.� For 802.11n support you must use WPA2 (AES).

• By default, the SSID is W150NR.
• For WPA (TKIP) or WPA2 (AES), the encryption key must be between 8 and 63 ASCII or 64 HEX characters.� Make sure to copy down the encryption key.

7. Click Apply

8. Open up your browser and enter in a URL (e.g. www.keebox.com ) to verify that you have an Internet connection.

Your Configuration is now complete.
For detailed information regarding the W150NR's configuration and advanced settings please refer to the Troubleshooting section in the Quick Installation Guide, the User�s Guide located on the CD-ROM or KEEBOX's website at www.keebox.com.