Language: English Español
Home » Support » Knowledge Base » Wireless 150 N » W150NR
Search:
Browse:
KB ID#:
Hardware Installation

  1. Verify that you have an Internet connection when connecting your computer directly to the Cable or DSL modem.� For example, open your web browser (e.g Internet Explorer) and type in a URL (e.g. http://www.KEEBOX.com) in the address bar.�� You should be able to access the KEEBOX webpage if you have a valid Internet Connection.

  1. Connect the detachable antenna to the W150NR.� Power down your Cable or DSL modem and disconnect the RJ-45 cable from your computer to the W150NR�s WAN port.� The other end of the cable should remain connected to your Cable or DSL modem.

  1. Connect one end of the provided RJ-45 cable to the W150NR�s LAN port.�� Connect the other end of the cable to the computer�s Ethernet port.� Connect the power adapter to the W150NR and then to a power outlet.�� Power up you Cable or DSL modem.

  1. Verify that the following panel lights are on: Power (Solid), WAN (Blinking), WLAN (Blinking) and LAN (Blinking)

 
Knowledgebase ID 2142
 Created: 7/10/2010
Modified: 7/10/2010
 Attachments
 No attachments.

Would you like to...
 Print this page
Email this to a friend
  KB Rating
 (-1,607.0) 		Was this answer helpful:
(5 = very helpful. 0 = not helpful at all)
5 4 3 2 1